Nonresidential Modules

Nonresidential

Nonresidential Mandatory Measures (NRM0)

  • The CEC now requires a series of forms to be submitted with projects, depending upon scope.  This module is used to complete the following mandatory forms:

NRCC-CXR Design review forms applicable to all nonresidential projects.

(Due to the large amount of data, these forms are provided as fillable forms, but are not auto-populated by the software)

NRCC-ELC Electrical compliance forms

NRCC-SRA Solar ready compliance forms

  • Price – $150.00

Nonresidential Prescriptive Envelope (NRM1)

  • Demonstrate building envelope compliance with the current version of the California Title 24 code for nonresidential/high-rise residential/hotel-motel buildings. This module will calculate envelope compliance using the CEC Envelope Component compliance method and produce the ENV-01 Certificate of Compliance and supporting ENV worksheets.
  • Price – $150.00

Nonresidential Title 24 Prescriptive Indoor Lighting (NRM2)

  • Demonstrate indoor lighting compliance with the current version of the California Title 24 code for nonresidential/high-rise residential/hotel-motel buildings. This module will calculate indoor lighting compliance using the CEC Complete Building, Area Category or Tailored methods of compliance and produce the LTI-01 Certificate of Compliance and supporting LTI worksheets.
  • Price – $150.00

Nonresidential Title 24 Prescriptive HVAC Compliance & Load Calculations (NRM3)

  • Determine the size requirements of HVAC systems using the ASHRAE TFM sizing methodology as published in the ASHRAE Handbook of Fundamentals. This module will allow for the accurate sizing of the HVAC system, and will produce the MCH compliance documentation needed for compliance with the current version of the California Title 24 code for nonresidential/high-rise residential/hotel-motel buildings. Capabilities of this module include the ability to do room by room load calculations for buildings.
  • Price – $260.00

Nonresidential Title 24 Prescriptive Outdoor Lighting (NRM4)

  • Demonstrate outdoor lighting compliance with the current version of the California Title 24 code for nonresidential/high-rise residential/hotel-motel buildings. This module will calculate outdoor lighting compliance for outdoor applications as well as signs and produce the LTO-01 Certificate of Compliance, LTS-01 Certificate of Compliance and supporting LTO worksheets.
  • Price – $150.00

Nonresidential Title 24 Process Loads (NRM5)

  • Demonstrate compliance with the Process Loads requirements in Title 24.  This module allows for documentation of Parking Garages, Commercial Kitchens, Computer Rooms, Commercial Refrigeration, Refrigerated Warehouses, Laboratories Compressed Air Systems, Process Boilers, Elevators and Escalators.  This module will complete all of the NRCC-PRC series of compliance forms. (Due to the large amount of data, the refrigeration and compressed air forms are provided as fillable forms, but are not auto-populated by the software)
  • Price – $250.00

Nonresidential Title 24 Performance (NRM6)

  • Demonstrate compliance with the current version of the California Title 24 code for nonresidential/high-rise residential/hotel-motel buildings using the Performance Approach. This module will calculate hourly building energy performance for all building end use categories including the Envelope, Lighting, HVAC and DHW systems. Documentation produced by this module includes the PRF-01 Performance Certificate of Compliance.
  • This module uses the EnergyPlus* software engine licensed from the Department of Energy to provide a highly accurate hourly simulation of building energy use. The Performance Approach allows trade-offs between various building components to determine Title 24 compliance, and will also calculate building energy cost using utility rates, and produce an ECON-1 form.
  • Price – $1,000.00

Nonresidential ASHRAE 90.1 (NRM7)

  • Demonstrate compliance with the ASHRAE 90.1 Standard using the Appendix G compliance methodology.  This module will automatically create the four baseline runs needed to show compliance with the 2013 version of the standard. (Version 6 applies the 90.1-2010 Standard, version 5 applies the 2004/2007 Standard).  For LEED compliance, the 90.1 methodology is used for projects outside of California, and can optionally be used for projects inside California.
  • This module uses the DOE-2.1E* v119 software engine licensed from the Department of Energy to provide a highly accurate hourly simulation of building energy use.  Documentation produced by this module includes the EAC-1 and EAP-S worksheets which can be used to complete the LEED template.
  • Price – $1,000.00

Nonresidential Performance (NRM8)

  • Calculate the energy performance nonresidential buildings when no code or compliance baselines are involved.  This module will perform an hourly simulation on the building, and determine annual energy consumption and energy cost.
  • This module uses the DOE-2.1E* v119 software engine licensed from the Department of Energy to provide a highly accurate hourly simulation of building energy use.
  • Price – $600.00

Nonresidential Savings By Design Performance (NRM9)

  • Calculate the utility incentive amounts for nonresidential buildings under the Savings By Design statewide utility incentive program.  This module will perform an hourly simulation on the building, and determine annual energy consumption and energy cost.  It will allow for calculation of the Non-compliance standard and proposed building energy use which can be used for incentive purposes.
  • This module uses the DOE-2.1E* v119 software engine licensed from the Department of Energy to provide a highly accurate hourly simulation of building energy use.
  • Price – $600.00

Complete Non-Residential Title 24 (SP3)

  • includes the Interface and NRM0 – NRM6
  • Price – $1,700.00

Complete Nonresidential (SP4)

  • Includes Interface and NRM0 – NRM9
  • Price – $3,200.00

Complete Title 24 Package (SP5)

  • Includes the Interface, RM0 – RM2, and NRM0- NRM6
  • Price – $2,200.00

Complete Package (SP6)

  • Includes the Interface, RM0-RM4, NRM0 – NRM9
  • Price – $4,000.00

All first time EnergyPro purchases must purchase the Interface Module (IM1). Price – $200.00- This is already included in Package Options.

 

 *This software is not endorsed, authorized or associated with the U.S. Department of Energy.

Comments are closed