Error 1090

At each Zone is an input for the Number of Floors which determines how many stories for this particular zone.  So if a zone being modeled included both the second and third floors of a building, it would be set to two since that zone included two floors.  Normally you would set this to one and model each floor as a zone. The CEC CBECC engine will not allow this number to be greater than 3, which means the zone you are modeling consists of all three floors of a building.  While you might have a zone that exceeds 3 floors this particular input cannot be greater than 3.

To correct this, go to the Zone and change this number to no more than 3.

Please log in to rate this.
0 people found this helpful.


Category: Errors
Tags:

← Error 1090

Comments are closed